Double Glazing Door Lock Repairs
Has your uPVC window or door mechanism started to fail? Perhaps the handles on your uPVC windows or doors are not aligned properly or are difficult to use.
You'll lose energy when your double-glazed doors do not perform as they should. This increases the chance of burglary. Owen the Locksmith can repair your door lock for a reasonable price.
Snapped Key
It can be quite frustrating when a key snaps into a lock. This can also be a security risk because it could expose you to burglars if your door does not lock. There are fortunately quick fixes you can try to resolve the problem and get your door operating properly once more.
Remember to remain calm. If you panic you may end up pushing the broken key piece further into the lock.
Then spray WD-40 or another penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also employ a screwdriver in order to break up any pieces stuck that could be hindering the flow. If you're fortunate enough to have a small piece of the key left visible it, you can use a paperclip or some other metal object with a thin surface to grab it and then pull it out. Both methods work, but be cautious not to push the broken piece of the key further into the keyway.
Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't have one of these tools you can bend a hook with needle-nosed pliers. Also, a pair tweezers can be used to grip and remove the remaining part of the broken key.
If you can't get the broken piece of the key out, try using a lock de-icer. It is found in most hardware stores, and it works by freezing any moisture or ice that may be in the lock.
If none of these solutions seem to work, it might be time to call a locksmith. Fitlocks experts can quickly fix problems such as broken handles or snapped keys using uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms to ensure that they are simpler to operate. You can request a double-glazing repair online or call us to discuss your needs.
Broken Cylinder
A damaged cylinder could pose a major security risk. A locksmith professional can repair the cylinder. A locksmith must tap the cylinder in order to fix it. This can be done using the hammer or other tool. However, the best method is to make use of a wire or a long match. Then, position the end of the match or wire near the keyway. The locksmith can then strike the lock in order to crack it. This is far better than using a hammer, which could harm the lock.
The most frequent cause of cylinder head cracks is overheating. This can occur when the cylinder block as well as the cylinder head are made from different metals, including cast iron and aluminium. Different metals can heat up and cool off at different rates. This can cause localized hotspots to expand quicker than the rest.
Corrosion can be a cause of fractures in cylinders. If the cylinder block and head are not maintained in a timely manner they could corrosion or rust, which can cause them to expand more than they would normally. Over time, this can cause cracks.
If your uPVC window or door lock is brittle or requires an enormous amount of pressure to turn, it could be due to many things. A malfunctioning locking mechanism, misalignment, or a worn handle are common causes of this issue.
Fortunately, this is an easy and inexpensive fix for most double glazing owners. A professional locksmith will typically be able solve this issue within a matter of hours of arriving at your property. Depending on your needs, they can replace the locking mechanism, replace the window handles, and change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective solutions for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders which offer an additional layer of protection against burglars. This is a small cost to pay for the security that comes from knowing that your uPVC doors are secure.
Broken Handle
It's not surprising that window handle locks can break. They have complex mechanisms which deteriorate over time. If yours breaks, it can be difficult to determine the source of the issue and make sure that you repair it correctly.
If the issue is related to the locking mechanism inside or the latch, fixing your broken handle will increase your uPVC double glazing door's security and allow you to stop the draughts. If you do not repair or replace the handle could be expensive and could cause damage to the door's frame and lock It is therefore worth taking some time to make sure you do it correctly.
double glazing repair : With the window open, loosen the screw holding the handle. The screw should be on the inside of the back plate, normally covered by an aesthetically pleasing cover for the screw reasons. Be sure not to damage any of the internal parts within the handle, like the levers or plates on the opposite side of the spindle. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.
Then, using an additional screwdriver take the screw off that holds the handle to the spindle in the back. Once the screw is loose, pull the handle out and remove the broken spindle. Replace it with a new spindle, making sure it's the same length (you can find them online or at hardware stores). Securely screw it in the frame. Be cautious not to overtighten because this could cause damage to the handle or the window frame.
Close the handle and try it. It is likely that it will operate smoothly and you'll be able unlock your window.
Don't forget to double-check that your uPVC window is shut correctly when you're using the handle. If they're not, you could experience damp and draughts inside your home, as and also affecting the energy efficiency of your home. A local window company, such as Core Sash Windows, will be capable of adjusting the hinges on your window frames to ensure they are able to shut properly.
Broken Spindle
It is quite common that the spindle within the handle breaks, rather than the handle itself. This is most typical in uPVC tilt and turn windows. These windows require a handle which operates a locking mechanism in the window frame. The handle is connected to a central rod which is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism does not open when the handle is turned, it's likely the spindle is damaged. This could be a problem that is frustrating.
Luckily there are options to fix this problem. A good locksmith can quickly and efficiently fix this problem. A professional locksmith will be able disassemble the handle of the window by using a tool to take out the wheel part in which the spindle is. This is done without damage to the handle or window frame.
Once the wheel is removed, the technician will inspect the spindle to determine what has caused it to break. This involves breaking the spindle into its component parts and meticulously noting their general condition, as well as any specific areas of damage or excessive wear. The process is done in a clean environment by skilled technicians.
The next step is to clean the damaged spindle. This assists in removing any debris or dirt that could be hindering its normal operation. After this, the spindle could be repaired or replaced. If it is replaced, the technician could use a dowel of a similar size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle cannot be repaired, it could require replacement. Home centers can sell generic replacements but if the window design is unique, you will have to speak with a cabinet maker or woodworker who can replicate the exact component. Once the spindle has been installed, it is connected to the handle. Place the screw holes on the handle with the screws already in the frame. Once the handle is in place, you can use your uPVC windows.